For Brocade

categories

Original Brand Switch
5G
OEM Fiber Optic Transceiver
Original Brand Optical Transceiver
- For Cisco
- For Innolight
- For Arista
- For Color Chip
- For Dell
- For Alcatel-Lucent
- For Ciena
- For H3C
- For WTD
- For ZTE
- For Acacia
- For IBM
- For Infinera
- For HP
- For Intel
- For JDSU
- KAIAM
- For Mellanox
- For Opnext
- For Source
- For QLOGIC
- For Brocade
- For Juniper
- For Finisar
  - 100MB~8GB 16G 32G SFP
  - 25G 40GB 50G 100G Transceiver
  - 10GB Modules
- For Avago
- For Nokia
Network Card
Fiber Patch Cable
- AOC

new products

Brocade XBR-G6MIDR12PTPOD-32G BR-MIDRMFEB-01-Z software license for HD-G620-24-32G switch
Brocade XBR-G6MIDR12PTPOD-32G BR-MIDRMFEB-01-Z software license for HD-G620-24-32G switch
read more
24/64 ports Brocade G720 Switch G720-64-32G-F Fiber Optical Switch
The Brocade G720 Switch is a Gen 7 switch with 64 ports in an ultra-dense 1U design. Delivering unmatched 64G performance and 50% lower latency compared to the previous generation,
read more
Compatible QDD-400G-ZRP-S 400G ZRP Optical Transceivers
Compatible QDD-400G-ZRP-S 400G ZRP Optical Transceivers
read more
Compatible Mikrotik XS+2733LC15D SFP 1.25G FR Single Mode 1270nm+ 1330nm 15km Optical Transceivers
Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28
read more
Compatible Mikrotik XS+2733LC15D 10G QSFP+ SR Optical Transceivers
Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28 Optical Transceivers
read more
12/24 Ports Compatible Brocade BR6510 Gen 5 Fiber Channel 1U Switch BR6510-24-8G-R/BR6510-24-16GR/BR6510-24-16GR/6505-24-0-R Fiber Optical Switch Suitable For 57-1000117-01/57-1000027-01/57-0000080-01/57-0000088-01/57-0000089-01
12/24 Ports Compatible Brocade BR6510 Gen 5 Fiber Channel 1U Switch BR6510-24-8G-R/BR6510-12-8GR/BR6510-24-8GR Fiber Optical Switch Suitable For 57-1000117-01/57-1000027-01/57-0000080-01/57-0000088-01/57-0000089-01/57-1000487-01/57-0000089-01/57-1000488-01/57-1000262-01/57-1000489-01/XBR-000458/XBR-000258/XBR-000499/XBR-000498
read more

LWDM4 LC 100G QSFP28 Module 100G CFP2 ER4 1310nm 40km CE FCC

Topstar TCFP2-100G-ER4, The 100G CFP2 ER4 optical transceiver integrates the transmit and receive path onto one module. On the transmit side, four lanes of serial data streams are recovered, retimed,and passed on to four laser drivers, which control four electric-absorption modulated lasers (EMLs) with 1296, 1300, 1305, and 1309nm center wavelengths. The optical signals are then multiplexed into a single-mode fiber through an industry-standard LC connector.On the receive side, four lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data steam is recovered by a PIN photo detector and transimpedance amplifier, retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and MDIO management interface.

item no.:
TCFP2-100G-ER4
brand:
Brocade
Warranty:
1 Year
Condition:
New
Temperature:
0~70℃
Data Rate:
100G
Distance:
40km
Wavelength:
1310nm
Connector:
LC Duplex

contact now

product details

100G CFP2 ER4 1310nm 40km LWDM4 LC Network Tools And Equipment

100G CFP2 ER4 Network Tools And Equipment

Parameters

Fiber Type	SMF Cable
Connector	LC
Lasers and TIA	EML+PIN
Data Rate, each Lane	4x25 Gbps
Rx Sensitivity	-16 dBm to 4.5 dBm
Tx Transmitter	-2.9 dBm to +2.9 dBm
Extinction Ratio	8 dB
Max Power Consumption	Less than 12 W
Single Power Supply	3.3 V

PRODUCT FEATURES

Supports up to 112Gbps bit rates
Duplex LC connector
Hot pluggable
Operating electrical serial data rate up to 27.952493Gbps
APD ROSA
4 parallel electrical serial interface
Applicable for 40km SMF connection
Low power consumption, < 12W
Digital Diagnostic Monitor Interfacel
MDIO Communication Interface
Compliant with 100GBASE-ER4
Operating case temperature: Commerical:0 to 70 °C

APPLICATIONS

Local Area Network(LAN)
Wide Area Network(WAN)
Switch to router interface

Standards

Compliant with IEEE 802.3ba
Compliant with CFP2 MSA hardware specifications
Compliant with CFP2 MSA management specifications
Compliant with ITU-T G709/Y.1331
Compliant with RoHS

FAQ

Q1. Are your transceiver modules compatible with Cisco?

A1: Yes, Topstar transceivers can compatible with Cisco. All the brand Topstar's SFP compatible as the fellowing:Cisco, Nortel, Juniper, 3COM, H3C, Alcatel-lucent, FOUNDRY, D-Link, EXTREME, Ruijie, NETGEAR, ZTE, Enterasys, ZyXEL, Linksys, Ericsson, DCN, Allied, SMC, Brocade, Force10, Hirschmann, Planet, Adtran, ASNTE, Trendnet, BDCOM, BLADE, BITWAY, Telco, Feixun...etc.

Q2. How does your company do regarding quality control?

A2: Every single optic individually tested in our test center , and also tested for compatibility on a variety of different brands of network equipment.

Q3. What are the trade terms?

A3: EXW-Shenzhen or FOB-Shenzhen or More you want

Payment term: T/T, Western Union, Alipay, Paypal, L/C and so on for your option.

Q4. What is operating temperature range of optical modules?

A4: Commercial temperature range(COM) : 0 to 70°C(32 to 158°F)

Storage temperature range:-40 to +85°C(-40 to 185°F)

We can supply according to your request.