100G QSFP28

categories

Original Brand Switch
5G
OEM Fiber Optic Transceiver
Original Brand Optical Transceiver
- For Cisco
- For Innolight
- For Arista
- For Color Chip
- For Dell
- For Alcatel-Lucent
- For Ciena
- For H3C
- For WTD
- For ZTE
- For Acacia
- For IBM
- For Infinera
- For HP
- For Intel
- For JDSU
- KAIAM
- For Mellanox
- For Opnext
- For Source
- For QLOGIC
- For Brocade
- For Juniper
- For Finisar
  - 100MB~8GB 16G 32G SFP
  - 25G 40GB 50G 100G Transceiver
  - 10GB Modules
- For Avago
- For Nokia
Network Card
Fiber Patch Cable
- AOC

new products

Brocade XBR-G6MIDR12PTPOD-32G BR-MIDRMFEB-01-Z software license for HD-G620-24-32G switch
Brocade XBR-G6MIDR12PTPOD-32G BR-MIDRMFEB-01-Z software license for HD-G620-24-32G switch
read more
24/64 ports Brocade G720 Switch G720-64-32G-F Fiber Optical Switch
The Brocade G720 Switch is a Gen 7 switch with 64 ports in an ultra-dense 1U design. Delivering unmatched 64G performance and 50% lower latency compared to the previous generation,
read more
Compatible QDD-400G-ZRP-S 400G ZRP Optical Transceivers
Compatible QDD-400G-ZRP-S 400G ZRP Optical Transceivers
read more
Compatible Mikrotik XS+2733LC15D SFP 1.25G FR Single Mode 1270nm+ 1330nm 15km Optical Transceivers
Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28
read more
Compatible Mikrotik XS+2733LC15D 10G QSFP+ SR Optical Transceivers
Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28 Optical Transceivers
read more
12/24 Ports Compatible Brocade BR6510 Gen 5 Fiber Channel 1U Switch BR6510-24-8G-R/BR6510-24-16GR/BR6510-24-16GR/6505-24-0-R Fiber Optical Switch Suitable For 57-1000117-01/57-1000027-01/57-0000080-01/57-0000088-01/57-0000089-01
12/24 Ports Compatible Brocade BR6510 Gen 5 Fiber Channel 1U Switch BR6510-24-8G-R/BR6510-12-8GR/BR6510-24-8GR Fiber Optical Switch Suitable For 57-1000117-01/57-1000027-01/57-0000080-01/57-0000088-01/57-0000089-01/57-1000487-01/57-0000089-01/57-1000488-01/57-1000262-01/57-1000489-01/XBR-000458/XBR-000258/XBR-000499/XBR-000498
read more

500m Parallel Single Mode Fiber Optic Transceiver 100G QSFP28 PSM4 1310nm

This product is a parallel 100Gb/s Quad Small Form-factor Pluggable (QSFP28) optical module. It provides increased port density and total system cost savings. The QSFP28 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 25Gb/s operation for an aggregate data rate of 100Gb/s on 0.5km of single mode fiber.

An optical fiber ribbon cable with an MTP/MPO connector can be plugged into the QSFP28 module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel to channel alignment. Electrical connection is achieved through an MSA-compliant 38-pin edge type connector.

The module operates with single +3.3V power supply. LVCMOS/LVTTL global control signals, such as Module Present, Reset, Interrupt and Low Power Mode, are available with the modules. A 2-wire serial interface is available to send and receive more complex control signals, and to receive digital diagnostic information. Individual channels can be addressed and unused channels can be shut down for maximum design flexibility.

item no.:
TQSFP28-100G-ZR
brand:
Brocade
Warranty:
1 Year
Condition:
New
Temperature:
0~70℃
Data Rate:
100G
Distance:
70km
Wavelength:
LWDW4
Connector:
LC Duplex

contact now

product details

QSFP28 100G Transceiver Ethernet LWDM4 70KM Single-Mode Optical Fiber

QSFP28 100G Transceiver

This product is a 100Gb/s transceiver module designed for optical communication applications compliant to Ethernet 100GBASE-70km standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. Reversely on the receiver side, the module de-multiplexes a 100Gb/s optical input into 4 channels of LAN WDM optical signals and then converts them to 4 output channels of electrical data.

Parameters

Fiber Type	Single-mode Cable
Connector	LC
Lasers and TIA	EML APD
Tx Power	2 to 4.5 dBm
Rx Sensitivity	-22 to 4.5 dBm
Extinction Ratio	6 dB
Power Consumption	4.5 W
Single Power Supply	3.3 V

PRODUCT FEATURES

Compliant to Ethernet 100GBASE-70km
Supports 103.125Gb/s aggregate bit rate
Transmitter: cooled 4x25Gb/s LAN WDM EML TOSA (1295.56, 1300.05, 1304.58, 1309.14nm)
Receiver: 4x25Gb/s APD ROSA
Up to 70km reach for G.652 SMF
Duplex LC optical receptacle
4x25G electrical interface (OIF CEI-28G-VSR)
RoHS-10 compliant and lead-free
Single +3.3V power supply
Maximum power consumption 4.5W
Case operating temperature Commercial: 0 ~ +70oC Extended: -10 ~ +80oC Industrial: -40 ~ +85oC

APPLICATIONS

100GBASE-70km Ethernet Links
Infiniband QDR and DDR interconnects
Client-side 100G Telecom connections

FAQ

Q1. Are your transceiver modules compatible with Cisco?

A1: Yes, Topstar transceivers can compatible with Cisco. All the brand Topstar's SFP compatible as the fellowing:Cisco, Nortel, Juniper, 3COM, H3C, Alcatel-lucent, FOUNDRY, D-Link, EXTREME, Ruijie, NETGEAR, ZTE, Enterasys, ZyXEL, Linksys, Ericsson, DCN, Allied, SMC, Brocade, Force10, Hirschmann, Planet, Adtran, ASNTE, Trendnet, BDCOM, BLADE, BITWAY, Telco, Feixun...etc.

Q2. How does your company do regarding quality control?

A2: Every single optic individually tested in our test center , and also tested for compatibility on a variety of different brands of network equipment.

Q3. What are the trade terms?

A3: Lead Time: we keep 40,000pcs SFP in stock ready to ship.

Payment term: T/T, Western Union, Alipay, Paypal, L/C and so on for your option.

Q4. What is operating temperature range of optical modules?

A4: Commercial temperature range(COM) : 0 to 70°C(32 to 158°F)

Extended temperature range(EXT):-5 to 85°C(23 to 185°F)

Industrial temperature range(IND)::-40 to 85°C(-40 to 185°F)

Storage temperature range:-40 to +85°C(-40 to 185°F)

We can supply according to your request.