#+86-15989863956

#lisa@topsfp.com
English
  • facebook
  • linkedin
  • twitter
  • google+
  • pinterest
  • youtube

what are you looking for?

Optical Transceiver Module
home OEM Fiber Optic Transceiver BASE-T SFP

Compatible Cisco SFP-GE-T 1000Base Copper Modules 1G RJ45 SFP

BASE-T SFP
new products

SFP-GE-T
SFP-GE-T SFP-GE-T SFP-GE-T SFP-GE-T

Compatible Cisco SFP-GE-T 1000Base Copper Modules 1G RJ45 SFP

Compatible Cisco SFP-GE-T transceivers are high performance, cost-effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supports 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable and support CAT 6. 1000Base Copper Modules support 1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. 1G RJ45 SFP module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address A0h.

  • item no.:

    Top-SFP-T

  • lead time:

    2-7 Working Days After Payment Received

  • product orgin:

    China

  • brand:

    Top-Trans

  • shipping port:

    Shenzhen

  • Warranty:

    3 Years

  • Condition:

    Compatible

  • Temperature:

    0°C to 70°C

  • Data Rate:

    1000 M

  • Distance:

    100 M

  • Wavelength:

    N/A

  • Connector:

    RJ45
contact now
Datasheet
product details

Compatible Cisco SFP-GE-T 1000Base Copper Modules 1G RJ45 SFP

Compatible SFP-GE-T is compatible with Cisco Huawei Juniper Arista etc. types of equipment for the network solution.


Product Features

Up to 1.25Gb/s bi-directional data links

Hot-pluggable SFP footprint

Extended case temperature range (0°C to +70°C )

Fully metallic enclosure for low EMI

Low power dissipation (1.05 W typical)

Compact RJ-45 connector assembly

Access to physical layer IC via 2-wire serial bus

1000 BASE-T operation in host systems with SERDES interface

10/100/1000Mbps compliant in host systems with SGMII interface


Applications

1.25 Gigabit Ethernet over Cat 5 cable


Below is the picture of 1000Base Copper Modules


SFP-GE-T


Professional Service

1G RJ45 SFP is fully tested in Error Detector/ Industrial Oven/ Agilent Oscilloscope/ Digitizer/ Wave Runner, etc. The specialist will test the modules before every shipment.

 

Compatibility

Tested in Cisco/ Brocade/ Juniper/ Dell/ Arista/ HPE/ H3C etc. devices to guarantee 100% compatibility with your target equipment. 


OEM& ODM

Customized label and package. Both OEM and ODM service are offered. 

tags : Copatible Cisco SFP-GE-T 1000Base Copper Modules 1G RJ45 SFP
Send Us An Inquiry

We will contact you as soon as possible!

related products
  • Professional SFP Copper RJ45 Module 10/100/1000 Mbps Modules Ethernet to SFP Supplier SFP Copper RJ45 Module 10/100/1000 Mbps Modules Ethernet to SFP

    SFP Copper RJ45 Module is high performance, cost-effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supporting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair CAT 5 cable. The module supports1000 Mbps (or 10/100/1000Mbps Modules) full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair.Ethernet to SFP,The module provides standard serial ID information compliant with SFP MSA, which can be accessed with an address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address ACh.

  • Cisco Compatible RJ45 Copper SFP Cisco Compatible RJ45 Copper SFP Transceiver Module 10/100Base-T

    Cisco Compatible RJ45 Copper SFP transceivers are high performance, cost-effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE802.3u. Copper SFP Transceiver Module supports 100Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable. The module supports 10/100 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 25Mbps on each pair. The 10/100Base-T module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address A0h.

  • 10G Copper SFP 10G Copper SFP Juniper EX-SFP-10GE-T Compatible 10GBASE-T SFP+ Copper RJ-45

    10G Copper SFP transceivers are based on the SFP Multi-Source Agreement (MSA). Juniper EX-SFP-10GE-T Compatible is compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. 10GBASE-T SFP+ uses the SFP's RX_LOS pin for link indication. If you pull up SFP's TX_DISABLE pin,  PHY IC should be reset.

  • Cisco SFP-10G-T-S Compatible Cisco SFP-10G-T-S RJ-45 10GBase Copper SFP+ Transceiver

    10G RJ45 Copper SFP+ transceivers are based on the SFP Multi-Source Agreement (MSA). Copper RJ-45 Transceiver is compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. 10GBase Copper SFP+ uses the SFP's RX_LOS pin for link indication. If you pull up SFP's TX_DISABLE pin,  PHY IC should be reset.

  • TOP-SFP-T Compatible With Brocade 57-1000042-01 Copper SFP Compatible With Brocade XBR-000190 Switch 1000M RJ45 100m Fibre Optic For Brocade 7800

    Copper Small Form Pluggable (SFP) transceivers is Compatible with Brocade 7800 7840.SFP 1000M RJ45 100m optical transceivers are designed for 1000Mb/s serial optical interfaces.Please read and check it.

  • 25G SFP28 ER 40KM Compatible 5G Network 25GE SFP+ 1310nm 10KM For Fibre Channel and 25G Ethernet 25G SFP28 ER industrial optical modules with Hot-Pluggable

    25GE SFP+ 1310nm 40KM Optical Transceiver: SFP+ optical transceivers are designed for use in Fibre Channel links up to 25.78 Gb/s data rate and up to 40 km link length. 

  • Cisco DS-X2-FC10G-LR Cisco DS-X2-FC10G-LR Compatible 10G Fibre Channel X2 1310nm 10km DOM Transceiver Module

    Cisco DS-X2-FC10G-LR Compatible 10G Fibre Channel X2 1310nm 10km DOM Transceiver Module is transmission distance up to 10km over SMF, Low Power Consumption 2.0 W (typ.) And hot pluggable 70-pin connector with XAUI electrical, kindly buy it on our web.

  • Finisar FTLF8532P4BCV SFP+ 32G Compatible Finisar FTLF8532P4BCV 850nm 100m 32G Fibre Channel 32GFC RoHS Compliant SFP+ Transceiver

    Finisar’s FTLF8532P4BCV SFP+ transceivers are designed for use in Fibre Channel links up to 28.05 Gb/s data rate over multimode fiber. They are compliant with FC-PI-6a, SFF-8472 Rev 12.2c, and compatible with SFF-8432b and applicable portions of SFF8431 Rev. 4.1d. The transceiver is RoHS compliant and per Directive 2011/65/EUe. See Finisar Application Note AN-2038 for more details.

contact us

copyright © 2024 Topstar Technology Industrial Co., Ltd..all rights reserved. powered by dyyseo.com

chat now

live chat
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!