24 Ports Compatible Dell DS-6610B 32Gb/s Fibre Channel Switch Models

Cisco XFP-10G-BXU-I Compatible 10GBASE-BX XFP 1270nm-TX/1330nm-RX 10km DOM Transceiver Module applications 10GBASE-BX10.3125Gb/s Ethernet, 10GBASE-BX9.953Gb/s Ethernet, SONETOC-192 &SDHSTM I-64.1.

RTXM500-320 200G QSFP56 LR4 transceiver modules are designed for use in 200 Gigabit Ethernet links on up to 10km of single mode fiber. They are compliant with the QSFP MSA and IEEE 802.3bs.The optical transceiver is RoHS compliant.

The Finisar FTLC1154RDPL optical module is a high-performance solution meticulously engineered to deliver efficient and reliable fiber optic connectivity across a range of networking applications. Designed to meet the demands of modern data centers, enterprise networks, and telecommunications environments, this module provides exceptional performance and versatility.

This Ciena NTK588AAE5 compatible XFP transceiver provides 10GBase-DWDM throughput up to 40km over single-mode fiber (SMF) using a wavelength of 1528.77nm via an LC connector. It is guaranteed to be 100% compatible with the equivalent Ciena transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty.

SFP Copper RJ45 Module is high performance, cost-effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supporting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair CAT 5 cable. The module supports1000 Mbps (or 10/100/1000Mbps Modules) full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair.Ethernet to SFP,The module provides standard serial ID information compliant with SFP MSA, which can be accessed with an address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address ACh.

FP laser transmitter and PIN photo-detector，Dual Data-rate of 1.25Gbps/1.0625Gbps Operation，Up to 2km transmission distance on 9/125μm MMF/SMF，Compliant with SFP MSA and SFF-8472 with duplex LC receptacle，Digital Diagnostic Monitor Interface，Very low EMI and excellent ESD protection，+3.3V single power supply，Compatible with RoHS，Operating case temperature: Commercial: 0°C to +70°C    Extended: -10°C to +80°C   Industrial: -40°C to +85°C

Orinigal ARISTA QSFP-DD QSFP-DD 400G-CR8 400GBASE-CR8 Twin-ax passive copper cables with link lengths of 1m, 2m and 2.5m. Active copper breakout cables with link length up to 5m.

Compatible WTD 2.5G SFP 1471nm RTXM192-847 CWDM DFB 1471nm 80km optical transceiver are designed for optical interfaces for data  communications with Mutil mode fiber(MMF). The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for telecom applications.